26
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
You may change the layout of the
screen during presentations. Typical
options available will be with or
without showing the presenter and
showing the presenter as either
a PiP (Picture in Picture) or PoP
(Picture outside Picture).
The layout options available on
your system may dier from those
shown here, but the layouts shown
are always those you may choose
between.
Change Presentation Layout In a Call
Content Sharing
About
Presentation Layout
Navigate to Layout ( ) in the upper right corner and press OK
on the remote control. This icon will appear only when relevant.
Use the Cursor keys to navigate to the new layout you would like to
use and press OK.
1 2
To Next Page
Loading...
