Use the following procedure to recycle the UCS IFMs.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics and sheet metal for proper disposal to comply with local eco design
and e-waste regulations.
Note
You will find it helpful to gather the following tools before beginning this procedure:
• Screwdrivers: One each of T8 and T10 screwdriver, and #1 Phillips.
• Nut drivers: One 8mm hexagonal.
Step 1 Remove the following components by hand:
a) Grasp each fan module cable and remove it.
b) Grasp each fan module and remove it.
c) Grasp the M.2 storage module and remove it.
d) Grasp the light pipe and remove it.
Cisco UCS X9508 Server Chassis Installation Guide
94
Installing and Removing Components
Recycling the UCS 9108 25G IFM PCBs
To Next Page
Loading...
