Cisco UCS X9508 User Manual

Step 7 Grasp the rear bracket assembly and disconnect it from the rest of the chassis.
Step 8 With the rear bracket assembly removed, disconnect the PCB:
a) Grasp the cable and unplug it.
b) Using the T15 screwdriver, remove the 19 M4 screws, and remove the PCB from the chassis midplane sheet metal.
Cisco UCS X9508 Server Chassis Installation Guide
105
Installing and Removing Components
Recycling the Chassis PCB Assembly (PCBA)

Cisco UCS X9508 Specifications

General

Brand	Cisco
Model	UCS X9508
Category	Server
Language	English