EasyManuals Logo

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the VPN Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 117
5
Configuring VPN Passthrough
The VPN > VPN Passthrough window displays the settings needed to allow users
to have the router pass through the traffic, using their own VPN algorithms to
connect to their remote routers.
To configure VPN Passthrough settings for the router, follow these steps:
STEP1 Click VPN > VPN Passthrough.
STEP 2 Configure VPN Passthrough settings.
IPsec Passthrough—Internet Protocol Security (IPsec) is a suite of
protocols used to implement secure exchange of packets at the IP layer.
IPsec Passthrough is enabled by default to allow IPsec tunnels to pass
through the router. To disable IPsec Passthrough, select Disabled.
PPTP Passthrough—Point-to-Point Tunneling Protocol (PPTP) allows the
Point-to-Point Protocol (PPP) to be tunneled through an IP network. PPTP
Passthrough is enabled by default. To disable PPTP Passthrough, select
Disabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router and is the answer not in the manual?

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General IconGeneral
BrandCisco
ModelWRVS4400N - Small Business Wireless-N Gigabit Security Router
CategoryWireless Router
LanguageEnglish

Related product manuals