Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

Getting Started with the WRVS4400N Router
Placement Options
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 23
4
STEP 3 Repeat step 2 with the other stand.
Wall Option
To mount the Cisco WRVS4400N router on the wall, follow these steps.
STEP1 Determine where you want to mount the router and install two screws (not
supplied) that are 2-9/16 in. apart (approximately 64.5 mm).
STEP 2 With the back panel pointing up (if installing vertically), line up the router so that the
wall-mount crisscross slots on the bottom of the access point line up with the two
screws.
STEP 3 Place the wall-mount slots over the screws and slide the router down until the
screws fit snugly into the wall-mount slots.
193817
Wall
mount
slots
2-9/16

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General

Brand	Cisco
Model	WRVS4400N - Small Business Wireless-N Gigabit Security Router
Category	Wireless Router
Language	English