Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

5
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 28
Setting Up and Configuring the WRVS4400N
Wireless-N Router
The Wireless-N router works right out of the box with the default settings.
However, to change these settings, you can use the router’s web-based
configuration utility.
You can access the web-based configuration utility via a web browser (such as
Microsoft Internet Explorer or Mozilla Firefox) from a computer connected to the
same network the router is connected to.
This chapter includes the following sections:
• Accessing the Web-Based Utility, page 29
• Navigating the Utility, page 30
• Setting Up Your Wireless-N Router, page 36
• Configuring Wireless Settings, page 68
• Configuring Firewall Settings, page 88
• Configuring the ProtectLink Web Service, page104
• Configuring the VPN Settings, page105
• Configuring the QoS Settings, page118
• Configuring the Administration Settings, page123
• Configuring IPS Settings, page135
• Configuring the L2 Switch Settings, page141
• Viewing Status, page152

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General

Brand	Cisco
Model	WRVS4400N - Small Business Wireless-N Gigabit Security Router
Category	Wireless Router
Language	English