Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Restoring Factory Default Settings

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the Administration Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 132
5
Restoring Factory Default Settings
The Administration > Factory Defaults window provides a means of restoring the
configuration of the router to its factory defaults.
To restore factory default settings for the router, follow these steps:
STEP1 Click Administration > Factory Defaults.
STEP 2 Click Restore Factory Defaults to reset all configuration settings to their default
values.
If you click this button, all custom router settings are replaced by the default
settings.
STEP 3 When prompted, click OK to continue.