Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

Getting Started with the WRVS4400N Router
Installing the Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 24
4
Installing the Router
To prepare the router for installation do the following:
• Obtain the setup information for your specific type of Internet connection
from your Internet Service Provider (ISP).
• Power off all of your network hardware, including the router, PCs, and cable
modem or DSL modem.
Perform the steps in this section to install the hardware.
STEP1 Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1-
4) on the back of the router. Connect the other end to an Ethernet port on a PC.
STEP 2 Repeat step 1 to connect up to four PCs, switches, or other network devices to the
router.

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General

Brand	Cisco
Model	WRVS4400N - Small Business Wireless-N Gigabit Security Router
Category	Wireless Router
Language	English