Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router

To Next Page

To Previous Page

Getting Started with the WRVS4400N Router

Installing the Router

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 25

STEP 3 Connect an Ethernet network cable from your cable or DSL modem to the Internet

port on the router’s back panel.

STEP4 Power on the cable or DSL modem.

STEP 5 Connect the power adapter to the Power port on the router and plug the other end

into an electrical outlet.

STEP 6 The Power and Internet LEDs on the front panel will light up green as soon as the

power adapter is connected properly.

STEP 7 Power on the PCs.

The router hardware installation is now complete.

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 25