Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 89
5
Configuring Basic Settings
The Firewall > Basic Settings window displays the firewall-specific settings of the
router.
To configure basic firewall settings for the router, follow these steps:
STEP1 Click Firewall > Basic Settings.
STEP 2 Configure the basic firewall settings:
• Firewall—Enable this feature to perform deep packet inspection on all the
traffic going through the router and drop the packets that do not follow the
pre-defined protocol behavior. The default is Enable.
• DoS Protection—When enabled, the router prevents DoS (Denial of
Service) attacks coming in from the Internet. DoS attacks consume most of
the router’s resources and as a result they can prevent legitimate traffic from
passing through the router. The default Is Enable.
• Block WAN Request—When enabled, the router ignores PING Request from
the Internet so it seems to be hidden. The default is Enable.
• Remote Management—When enabled, the router allows the web-based
utility to be accessed from the Internet. The default is Disable.

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General

Brand	Cisco
Model	WRVS4400N - Small Business Wireless-N Gigabit Security Router
Category	Wireless Router
Language	English