Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 120

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the QoS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 120
5
• Priority
- Service—Select the service from the drop-down menu. If it does not
contain the service you need, click Service Management to add the
service.
- Direction—Select Upstream for outbound traffic or Downstream for
inbound traffic from the drop-down menu.
- Priority—Select service priority (High, Medium, Normal, or Low). The
default is Medium.
- Enable—Check this box to enable this priority rule.
- Add to list—After a rule is set up, click this button to add it to the list. The
list can contain a maximum of 15 entries.
- Delete selected application—Click this button to delete a rule from the
list.
STEP 3 Click Save.