Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 137

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring IPS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 137
5
Setting P2P/IM Policy
The IPS > P2P/IM window allows you to set up policies on using P2P or IM
software across the Internet.
To configure the P2P/IM policy settings, follow these steps:
STEP1 Click IPS > P2P/IM.
STEP 2 Configure the IPS P2P/IM settings for the router:
• Peer to Peer
When users download files from the Internet by Peer-to-Peer (P2P) software,
the WAN port bandwidth are occupied. Click Block to enable the blocking of
the following P2P software applications. The default is Non-Block.
- GNUTELLA_EZPEER
- FA ST TR ACK
- KURO
- EDONKEY2000
- BITTORRECT