Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 143

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the L2 Switch Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 143
5
To configure Virtual LANS for the router, follow these steps:
STEP1 Click L2 Switch > Create VLAN.
STEP 2 Configure Virtual LANS for the router:
• VLAN ID—The VLAN ID number. This can be any number from 2 to 3290, or
from 3293 to 4094. (VLAN ID 1 is reserved for the default VLAN, which is
used for untagged frames received on the interface. VLAN IDs 3291–3292
are reserved and cannot be used.) To create a VLAN, enter the ID number
and click Add VLAN.
• VLAN ID Range—To create multiple VLANs with a range of ID numbers,
enter the starting and ending ID numbers, then click Add Range.
• Delete Selected VLAN—To delete a VLAN, select it form the VLAN list, then
click Delete Selected VLAN.
STEP 3 Click Save.