Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 69

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Wireless Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 69
5
STEP 2 Configure the basic wireless settings:
• Wireless Network Mode—Select one of the following modes. The default
is B/G/N-Mixed.
- B-Only—All the wireless client devices can be connected to the router at
Wireless-B data rates with a maximum speed of 11Mbps.
- G-Only—Both Wireless-N and Wireless-G client devices can be
connected at Wireless-G data rates with a maximum speed of 54Mbps.
Wireless-B clients cannot be connected in this mode.
- N-Only—Only Wireless-N client devices can be connected at Wireless-
N data rates with a maximum speed of 300Mbps.
- B/G-Mixed—Both Wireless-B and Wireless-G client devices can be
connected at their respective data rates. Wireless-N devices can be
connected at Wireless-G data rates.
- G/N-Mixed—Both Wireless-G and Wireless-N client devices can be
connected at their respective data rates. Wireless-B clients cannot be
connected in this mode.
- B/G/N-Mixed—All the wireless client devices can be connected at their
respective data rates in this mixed mode.