Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 77

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Wireless Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 77
5
• WPA-Enterprise—This option features WPA used in coordination with a
RADIUS server for client authentication. (This should only be used when a
RADIUS server is connected to the router.)
- Encryption—WPA offers you two encryption methods, TKIP and AES for
data encryption. Select the type of algorithm you want to use, TKIP or
AES. The default is TKIP.
- RADIUS Server—Enter the RADIUS server’s IP address.
- RADIUS Port—Enter the port number used by the RADIUS server. The
default is 1812.
- Shared Key—Enter the Shared Secret key used by the router and
RADIUS server.
- Key Renewal—Enter a Key Renewal Timeout period, which instructs the
router how often it should change the encryption keys. The default is
3600 seconds.