8-6
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 8 Configuring SDM Templates
Displaying the SDM Templates
This is an example of output from the show sdm prefer routing command entered on an aggregator
switch:
Switch# show sdm prefer routing
"aggregate routing" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 6K
number of igmp groups + multicast routes: 1K
number of unicast routes: 20K
number of directly connected hosts: 6K
number of indirect routes: 14K
number of policy based routing aces: 512
number of qos aces: 512
number of security aces: 1K
This is an example of output from the show sdm prefer routing command entered on a desktop switch:
Switch# show sdm prefer routing
"desktop routing" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 3K
number of igmp groups + multicast routes: 1K
number of unicast routes: 11K
number of directly connected hosts: 3K
number of indirect routes: 8K
number of policy based routing aces: 512
number of qos aces: 512
number of security aces: 1K