31-8
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 31 Configuring Network Security with ACLs
Configuring IP ACLs
Note In addition to numbered standard and extended ACLs, you can also create standard and extended named
IP ACLs using the supported numbers. That is, the name of a standard IP ACL can be 1 to 99; the name
of an extended IP ACL can be 100 to 199. The advantage of using named ACLs instead of numbered lists
is that you can delete individual entries from a named list.
Table 31-1 Access List Numbers
Access List Number Type Supported
1–99 IP standard access list Yes
100–199 IP extended access list Yes
200–299 Protocol type-code access list No
300–399 DECnet access list No
400–499 XNS standard access list No
500–599 XNS extended access list No
600–699 AppleTalk access list No
700–799 48-bit MAC address access list No
800–899 IPX standard access list No
900–999 IPX extended access list No
1000–1099 IPX SAP access list No
1100–1199 Extended 48-bit MAC address access list No
1200–1299 IPX summary address access list No
1300–1999 IP standard access list (expanded range) Yes
2000–2699 IP extended access list (expanded range) Yes
To Next Page
Loading...
Need help?
General