32-68
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 32 Configuring QoS
Displaying Standard QoS Information
show mls qos queue-set [qset-id] Display QoS settings for the egress queues.
show policy-map [policy-map-name [class
class-map-name]]
Display QoS policy maps, which define classification criteria for
incoming traffic.
Note Do not use the show policy-map interface privileged
EXEC command to display classification information
for incoming traffic. The interface keyword is not
supported, and the statistics shown in the display should
be ignored.
Table 32-15 Commands for Displaying Standard QoS Information (continued)
Command Purpose
To Next Page
Loading...
