3-12
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 3 Getting Started with CMS
Displaying CMS
Figure 3-4 Switch Home Page
The switch home page has these tabs:
• Express Setup—Opens the Express Setup page
Note You can use Express Setup to assign an IP address to an unconfigured switch. For more
information, refer to the hardware installation guide.
• Cluster Management Suite—Launches CMS
• Tools—Accesses diagnostic and monitoring tools, such as Telnet, Extended Ping, and the show
interfaces privileged EXEC command
• Help Resources—Provides links to the Cisco website, technical documentation, and the Cisco
Technical Assistance Center (TAC)
Step 3 Click Cluster Management Suite to launch the CMS interface. The CMS Startup Report runs and
verifies that your PC or workstation can correctly run CMS.
If you are running an unsupported operating system, web browser, CMS plug-in or Java plug-in, or if the
plug-in is not enabled, the CMS Startup Report page appears, as shown in Figure 3-5.
To Next Page
Loading...
Need help?
General