EasyManuals Logo

Citizen CL-E331 User Manual

Citizen CL-E331
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
73
Using label media with gaps
Peel a label and set the media so that only the backing paper (glassine paper) reaches the
platen roller and media sensor.
Label
Liner
media
Bottom sensor
Black
mark
3. Adjust the sensors.
Refer to Sensor adjustment
Sensor adjustment
1. Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.
2. Press the FEED key once to select sensor adjustment mode.
The buzzer emits 1 short tone.
The status LED also ashes in green.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The printer is now in sensor adjustment mode.
5. Press the FEED key to select either transmissive sensor or reective sensor.
Each press of the FEED key toggles between transmissive sensor and reective sensor op-
tions.
Sensor Buzzer Status LED
Color Interval
Transmissive sensor 1 short tones Green Flashes
Press the FEED key
Reective sensor 2 short tones Green Flashes quickly
6. Press and hold the FEED key for at least 3 seconds.

Table of Contents

Other manuals for Citizen CL-E331

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Citizen CL-E331 and is the answer not in the manual?

Citizen CL-E331 Specifications

General IconGeneral
Product colorBlack
Print technologyThermal transfer
Printing media thickness63.5 - 190 µm
Sustainability complianceYes
Sustainability certificatesCE, Federal Communications Commission (FCC), TUV, UL ECOLOGO, VCCI
Display-
Control typeButtons
ColorNo
Maximum resolution- DPI
Printable dot numbers300 dot
Ribbon width60 mm
Core diameter25 mm
Ribbon length300 m
Media thickness0.150 mm
Maximum label width118 mm
Maximum media length1625.6 mm
Maximum roll diameter125 mm
RS-232 ports1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Flash memory16 MB
Internal memory32 MB
Built-in barcodesCODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, GS1 DataBar, ITF, PDF417, QR Code, UPC-A, UPC-E
Server operating systems supportedWindows Server 2012, Windows Server 2016, Windows Server 2019, Windows Server 2022
Windows operating systems supportedWindows 10, Windows 11, Windows 7
Weight and Dimensions IconWeight and Dimensions
Depth266 mm
Width178 mm
Height173 mm
Weight2600 g
Label width104 mm

Related product manuals