EasyManuals Logo

Citizen CL-E331 User Manual

Citizen CL-E331
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
78
5. Press the FEED key to select an emulation switching mode.
Each press of the FEED key cycles through the emulation mode options of DMX mode, ZPL
mode, and EPL mode.
Emulation mode Buzzer Status LED
Color Interval
DMX mode 1 short tones Green Flashes
Press the FEED key
ZPL mode 2 short tones Green Flashes quickly
Press the FEED key
EPL mode 3 short tones Amber Flashes
Press the FEED key
Returns to DMX mode.
6. Press and hold the FEED key for at least 3 seconds.
7. Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The selected emulation mode is set, and the printer restarts.
To cancel setting the emulation mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your nger at step 7.
The buzzer emits 4 short tones, and the printer restarts.
7.5 HEX Dump Mode
This mode is used to print a hex dump list (data received by the printer represented in
hex values) for conrmation of the data content.
Example of dump list printing
Load media and then perform the following procedure.
1. Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.

Table of Contents

Other manuals for Citizen CL-E331

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Citizen CL-E331 and is the answer not in the manual?

Citizen CL-E331 Specifications

General IconGeneral
Product colorBlack
Print technologyThermal transfer
Printing media thickness63.5 - 190 µm
Sustainability complianceYes
Sustainability certificatesCE, Federal Communications Commission (FCC), TUV, UL ECOLOGO, VCCI
Display-
Control typeButtons
ColorNo
Maximum resolution- DPI
Printable dot numbers300 dot
Ribbon width60 mm
Core diameter25 mm
Ribbon length300 m
Media thickness0.150 mm
Maximum label width118 mm
Maximum media length1625.6 mm
Maximum roll diameter125 mm
RS-232 ports1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Flash memory16 MB
Internal memory32 MB
Built-in barcodesCODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, GS1 DataBar, ITF, PDF417, QR Code, UPC-A, UPC-E
Server operating systems supportedWindows Server 2012, Windows Server 2016, Windows Server 2019, Windows Server 2022
Windows operating systems supportedWindows 10, Windows 11, Windows 7
Weight and Dimensions IconWeight and Dimensions
Depth266 mm
Width178 mm
Height173 mm
Weight2600 g
Label width104 mm

Related product manuals