Citizen CL-E331 User Manual

77
——
5. Press and hold the FEED key for at least 3 seconds.
6. Release the FEED key once the buzzer emits a long tone.
The conguration print process starts.
Once the conguration has been printed, the printer will be in the online state.
7. To print congurations that include default settings, continue pressing and holding the
FEED for at least 3 seconds without releasing your nger at step 6.
8. Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The process to print a conguration that includes default settings starts.
Once the conguration has been printed, the printer will be in the online state.
 To cancel conguration printing, continue pressing and holding the FEED key for at
least 3 seconds without releasing your nger at step 7.
The buzzer emits 4 short tones, and the printer restarts.
7.4 Emulation switching mode
This mode is used to change the command set used.
The default setting is [DMX mode].
1. Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.
2. Press the FEED key 4 times to select emulation switching mode.
The buzzer emits 4 short tone.
The status LED also ashes quickly in amber.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The printer is now in emulation switching mode.

Citizen CL-E331 Specifications

General

Product color	Black
Print technology	Thermal transfer
Printing media thickness	63.5 - 190 µm
Sustainability compliance	Yes
Sustainability certificates	CE, Federal Communications Commission (FCC), TUV, UL ECOLOGO, VCCI
Display	-
Control type	Buttons
Color	No
Maximum resolution	- DPI
Printable dot numbers	300 dot
Ribbon width	60 mm
Core diameter	25 mm
Ribbon length	300 m
Media thickness	0.150 mm
Maximum label width	118 mm
Maximum media length	1625.6 mm
Maximum roll diameter	125 mm
RS-232 ports	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Flash memory	16 MB
Internal memory	32 MB
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, GS1 DataBar, ITF, PDF417, QR Code, UPC-A, UPC-E
Server operating systems supported	Windows Server 2012, Windows Server 2016, Windows Server 2019, Windows Server 2022
Windows operating systems supported	Windows 10, Windows 11, Windows 7

Weight and Dimensions

Depth	266 mm
Width	178 mm
Height	173 mm
Weight	2600 g
Label width	104 mm