Citrix NetScaler MPX User Manual

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.62https://docs.citrix.com
When the rails are installed in the rack, you can install Access Gateway.
To install the appliance in the rack
1. Confirm that the appliance includes the inner rails (A) and rail extensions (B). Confirm that the outer rails (C) are installed
on the rack.
2. Line up the rails on the appliance (A and B) with the front of the rack rails (C).
3. Slide the appliance rails into the rack rails, keeping the pressure even on both sides. You might have to depress the locking
tabs during insertion. When the appliance is pushed completely into the rack, you should hear the locking tabs click.
4. (Optional) Insert and tighten the thumbscrews that hold the front of the appliance to the rack.
Figure 5. Installing the Access Gateway into the rack

Citrix NetScaler MPX Specifications

General

Category	Gateway
Throughput	Varies by model
SSL Transactions per Second	Varies by model
Concurrent Users	Varies by model
SSL Throughput	Varies by model
Compression Throughput	Varies by model
Max SSL Transactions Per Second	Varies by model
Max Concurrent Connections	Varies by model
Redundancy	Yes (HA configurations available)