© 1999-2017 Citrix Systems, Inc. All rights reserved. p.157https://docs.citrix.com
Group Name Identifier— Name that uniquely identifies a group in LDAP server.
Group Search Attribute— LDAP group search attribute. Used to determine to which groups a group belongs.
Group Search Subattribute— LDAP group search subattribute. Used to determine to which groups a group belongs.
Group Search Filter—String to be combined with the default LDAP group search string to form the search value.
4. Click Create, and then click Close.
Adding a TACACS Server
To configure TACACS authentication, specify the authentication type as TACACS, and configure the TACACS
authentication server.
To add a TACACS server
1. On the Configuration tab, under System, expand Authentication, and then click TACACS.
2. In the details pane, click Add.
3. In the Create TACACS Server dialogue box, type or select values for the parameters:
Name— Name of the TACAS server
IP Address— IP address of the TACACS server
Port— Port on which the T ACACS Server is running. Default value: 49
Time-out— Maximum number of seconds the system will wait for a response from the TACACS server
TACACS Key — Key shared between the client and the server. This information is required for the system to
communicate with the TACACS server
Accounting— Enables Management Service to log audit information with TACACAS server.
Default Authentication Group—Default group that is chosen when the authentication succeeds in addition to
extracted groups.
4. Click Create, and then click Close.
To Next Page
Loading...
Need help?
General
