© 1999-2017 Citrix Systems, Inc. All rights reserved. p.212https://docs.citrix.com
3. In the Confirm message box, click Yes.
Upgrading the SDXTools File for a BlueCat DNS/DHCP Instance
Updated: 2013-06-20
SDXTools, a daemon running on the third-party instance, is used for communication between the Management Service and
the third-party instance.
Upgrading SDXTools involves uploading the file to the SDX appliance, and then upgrading SDXTools after selecting an
instance. You can upload an SDXTools file from a client computer to the SDX appliance.
To upload an SDXTools file
1. In the navigation pane, expand Management Service, and then click SDXTools Files.
2. In the details pane, from the Action list, select Upload.
3. In the Upload SDXTools Files dialog box, click Browse, navigate to the folder that contains the file, and then double-click
the file.
4. Click Upload.
To upgrade SDXTools
On the Configuration tab, expand BlueCat DNS/DHCP.
1. Click Instances.
2. In the details pane, select an instance.
3. From the Action list, select Upgrade SDXTools.
4. In the Upgrade SDXTools dialog box, select a file, click OK, and then click Close.
Rediscovering a BlueCat DNS/DHCP Instance
Updated: 2013-06-20
You can rediscover an instance to view the latest state and configuration of an instance. During rediscovery, the
Management Service fetches the configuration. By default, the Management Service schedules instances for rediscovery
of all instances once every 30 minutes.
On the Configuration tab, expand BlueCat DNS/DHCP.
1. Click Instances.
2. In the details pane, select the instance that you want to rediscover, and from the Action list, click Rediscover.
3. In the Confirm message box, click Yes.
To Next Page
Loading...
Need help?
General
