© 1999-2017 Citrix Systems, Inc. All rights reserved. p.237https://docs.citrix.com
Generating the list of newnslog files to be processed...
Generating the events from newnslog files...
Checking for HDD errors...
/var/nslog/dmesg.prev:swap.NO
******************************************
HDD ERROR: FOUND 1 HDD errors: swap.NO
******************************************
Checking for HDD SMART errors...
Checking for Flash errors...
Checking for SSL errors...
Checking for BIOS errors...
Checking for SMB errors...
Checking for MotherBoard errors...
Checking for CMOS errors...
License year: 2014: OK
License server failed at startup. Check /var/log/license.log
Vendor daemon failed at startup. Check /var/log/license.log
Checking for SFP/NIC errors...
Checking for Firmware errors...
Checking for License errors...
Checking for Undetected CPUs...
Checking for DIMM flaps...
Checking the Power Supply Errors...
root@ns#
13. Important: Physically disconnect all ports except the LOM port, including the management port, from the network.
14. At the shell prompt, switch to the NetScaler command line. Type: exit
15. Run the following command to shut down the appliance: shutdown -p now
Example
> shutdown -p now
Are you sure you want to completely stop NetScaler (Y/N)? [N]:y
To upgrade the appliance
1. Locate the solid-state drive on the back panel of the appliance, as shown in the following figure:
To Next Page
Loading...
Need help?
General
