© 1999-2017 Citrix Systems, Inc. All rights reserved. p.28https://docs.citrix.com
Citrix NetScaler SDX 11515, SDX 11520, SDX 11530,
SDX 11540, and SDX 11542
Mar 14, 2014
The Citrix NetScaler models SDX 11515/11520/11530/11540/11542 are 2U appliances. Each model has two 6-core
processors for a total of 12 physical cores (24 cores with hyper-threading), and 48 gigabytes (GB) of memory.
The following figure shows the front panel of the SDX 11515/11520/11530/11540/11542 appliance.
Figure 1. Citrix NetScaler SDX 11515/11520/11530/11540/11542 appliance, front panel
The SDX 11515/11520/11530/11540/11542 appliances have the following ports:
RS232 serial console port.
10/100Base-T copper Ethernet Port (RJ45), also called LOM port. You can use this port to remotely monitor and manage
the appliance independently of the NetScaler software.
Note: The LEDs on the LOM port are not operational by design.
Two 10/100/1000Base-T copper Ethernet management ports (RJ45), numbered 0/1 and 0/2 from left to right. These
ports are used to connect directly to the appliance for system administration functions.
Eight 10G SFP+ ports and four copper or fiber 1G SFP ports.
The following figure shows the back panel of the SDX 11515/11520/11530/11540/11542 appliance.
Figure 2. Citrix NetScaler SDX11515/11520/11530/11540/11542 appliance, back panel
To Next Page
Loading...
Need help?
General
