© 1999-2017 Citrix Systems, Inc. All rights reserved. p.306https://docs.citrix.com
Checking for SMB errors...
Checking for MotherBoard errors...
Checking for CMOS errors...
License year: 2016: OK
License server failed at startup. Check /var/log/license.log
Vendor daemon failed at startup. Check /var/log/license.log
Checking for SFP/NIC errors...
Checking for Firmware errors...
Checking for License errors...
Checking for Undetected CPUs...
Checking for DIMM flaps...
Checking for LOM errors...
Checking the Power Supply Errors...
root@ns#
14. Important: Physically disconnect all ports except the LOM port, including the management port, from the network.
15. At the shell prompt, switch to the NetScaler command line. Type: exit
Example
root@ns#
root@ns# exit
logout
Done
16. Run the following command to shut down the appliance. You will be asked if you want to completely stop the
NetScaler. Type: shutdown -p now
Example
root@ns#
root@ns# exit
logout
To Next Page
Loading...
