Citrix NetScaler SDX 8015 - Page 6

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.9https://docs.citrix.com
Red Power supply has detected an error
LED ColorLED Color LED Indicat esLED Indicat es
The port LEDs show whether a link is established and traffic is flowing through the port. The following table describes the
LED indicators for each port. There are two LED indicators for each port type.
T able 1. LED port -st at us indicat orsT able 1. LED port -st at us indicat ors
Port T ypePort T ype LEDLED
Locat ionLocat ion
LEDLED
Funct ionFunct ion
LED ColorLED Color LED Indicat esLED Indicat es
10G SFP+ (10
Gbps)
Top Speed Off No connection.
Solid blue Traffic rate of 10 gigabits per second.
Bottom Link/
Activity
Off No link.
Solid green Link is established but no traffic is passing through the
port.
Blinking
green
Traffic is passing through the port.
1G SFP (1 Gbps) Left Link/
Activity
Off No link.
Solid green Link is established but no traffic is passing through the
port.
Blinking
green
Traffic is passing through the port.
Right Speed Off No connection.
Yellow Traffic rate of 1 gigabit per second.
Ethernet (RJ45) Left Speed Off No connection, or a traffic rate of 10 megabits per
second (Mbps).
Green Traffic rate of 100 Mbps.
Yellow Traffic rate of 1 gigabit per second.
Right Link/ Off No link.