ENGINE
167
CHECKING AND SETTING THE VALVE TIMING
Engine : RFN # 2003
Tools.
[1] Crankshaft setting peg : (-).0189-B
[2] Camshaft hub setting pegs : (-).0189-AZ
[3] Belt locking pin : (-).0189-K
[4] Positioning peg : (-).0189-J
[5] Hub immobilising tool : (-).6310-T
Removing.
Disconnect the battery.
Remove:
- The under-engine shield.
- The accessories drive belt (See corresponding operation).
Move aside :
- The fuel delivery pipe.
- The canister purge electrovalve.
- The expansion chamber
Remove :
-The screws (1) and (2).
- The torque reaction rod (3).
- The screws (4), plus the accessories drive pulley.
- The timing cover (5) and (6).
WARNING : Do not slacken the fixing screws (A).
XSARA - XSARA PICASSO
B1EK0V7DB1EK1T7DB1EK1UDD
To Next Page
Loading...
