168
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine : RFN # 2003
B1EK1UED
Removing (continued).
Peg :
- The camshafts, using tool [2].
- The crankshaft, using tool [1].
Slacken screw (7), holding tool [4].
Using the hexagonal key (C), turn the eccentric hub (8) of the tensioner
roller (9) (clockwise), to detension the belt. The cursor (10) presses on
the tool [4].
Remove the timing belt.
B1EK1UFD
XSARA - XSARA PICASSO
To Next Page
Loading...
