ENGINE
173
CHECKING AND SETTING THE VALVE TIMING
Engines : 6FZ - RFN # 2003OLD FITTING # 2003
(1) Crankshaft pinion.
(2) Flange.
(3) Accessories drive pulley.
(4) Screw fixing accessories drive pulley on flange (2).
(5) Screw fixing the flange (2) on the crankshaft.
«a» Integral keyway.
«b» Keyway slot.
The timing belt drive pinion (1) is separate from the flange (2).
With the fixing screw (5) of the flange (2) not slackened, the pinion (1) floats within the limit
of travel of the integral keyway «a» in the keyway slot «b».
NOTE : The flange is immobilised on the crankshaft by a half-moon keyway and by the screw (5).
XSARA - XSARA PICASSO
B1EP1B8D
To Next Page
Loading...
