ENGINE
191
CHECKING AND SETTING THE VALVE TIMING
Engine : WJY
Setting the valve timing (continued)
Tighten :
- The roller (9) to 2.1 m.daN.
- The screws (4) and (5) to 2.3 m.daN.
- Remove the tool [7].
- Fit the tool [7] to the belt strap at "a".
- The tensioning value should be between 42 ± 4 SEEM units.
ESSENTIAL : If the value obtained is outside the set limits, repeat the
tensioning operation.
- Remove the tools [7], [5], [1], [2] and [3].
- Rotate the crankshaft by 2 turns (direction of rotation).
- Check the valve timing.
B1EP134CB1EP133C
B1CP045C B1EP132C
XSARA
To Next Page
Loading...
