198
ENGINE
The new fitting discontinues the following components :
Camshaft hub.
Cylinder reference sensor target.
Repair – Accessories drive pulley
Remove – Refit
WARNING : Peg the camshaft and the crankshaft before ever removing the
accessories drive pulley (the pegging prevents any offsetting of the camshaft).
If necessary, apply a paint spot to mark the accessories drive pulley being
replaced.
Replacement parts.
The Replacement Parts service markets the old as well as the new components.
SPECIAL FEATURES: CHECKING AND SETTING THE VALVE TIMING
Engines : RHY - RHZ N° RPO 9128 #
NEW FITTING : RPO 9128 # (continued)
B1EP177D
XSARA - XSARA PICASSO
To Next Page
Loading...
