ENGINES
164
CHECKING THE VALVE TIMING
Engine: NFU
Remove the sparking plugs, to facilitate rotation of the crankshaft.
Rotate the engine by means of the crankshaft pinion screw (clockwise) to bring it to the pegging
position.
Fit the tools [2a] and [2b].
Peg the flywheel, using tool [1].
NOTE: If the setting proves impossible, restart the timing setting operation.
Remove the tools [1], [2a] and [2b].
Complete the refitting.
IMPERATIVE: Carry out the operations that are necessary following a reconnection of the
battery (see corresponding operation).
B1EP170C
B1BP2MBC
To Next Page
Loading...
