165
ENGINES
CHECKING AND SETTING THE VALVE TIMING
Engine: NFU
Tools.
[1] Flywheel setting peg : 4507-T.A Toolkit 4507-T
[2a] Camshaft setting peg :4533-TA.C1
[2b] Camshaft setting peg :4533-TA.C2
[3] Belt retaining pin :4533-T.AD
[4] Dynamic tensioner roller pin :4200-T.H
IMPERATIVE: Respect the safety and cleanliness requirements.
Removing.
Raise and support the vehicle, front wheels hanging.
Disconnect the battery.
Remove:
- The auxiliaries drive belt (4) (see corresponding operation).
- The crankshaft pulley (3).
- The oil filter.
Suspend the engine, using a workshop hoist.
Remove the timing cover, the engine support (1), the intermediate support and the timing cover (2).
B1BP382C
To Next Page
Loading...
