301
CLUTCH
GEARBOX
DRIVESHAFTS
TIGHTENING TORQUES: ML6 GEARBOX
Engine: RHR
Tightening torques (m.daN).
(5) Reverse gear switch : 2,5 ± 0,5
(6) Level plug :3 ±0,2
(7) Drain plug :3 ±0,3
(8) Differential bearing stop plate screw :3 ±0,3
(9) Screw fixing gearbox housing/clutch housing :3 ±0,3
(10) 6th gear housing fixing screw :2 ±0,2
(11) Differential housing fixing (screws M8) : 1,8 ± 0,3
(12) Differential housing fixing (screws M10) : 4 ± 0,8
B2CP3ZMP
To Next Page
Loading...
