In the event of a breakdown
244
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Spare wheel
Access to the tools
The tools are installed in the boot under the
floor.
Togainaccesstothem:
F open the boot,
F raise the floor,
F secureitbyhookingitscordonthehook
on the rear shelf support,
F with a standard size spare wheel, unclip
andremovetheboxinthemiddleofthe
wheelcontainingthetools,
or
F witha"space-saver"sparewheel;liftthe
wheel at the rear towards you for access to
thestorageboxcontainingthetools.
List of tools
Wheel with trim
When removing the wheel, detach the
trimfirstusingthewheelbrace1pulling
atthevalvepassagehole.
When refitting the wheel,refitthetrim
startingbyplacingitsnotchfacingthe
valveandpressarounditsedgewith
thepalmofyourhand.
Procedureforchangingawheelwithadamagedorpuncturedtyreforthesparewheel,usingthetoolssuppliedwiththevehicle.
All of these tools are specific to your
vehicleandcanvaryaccordingto
equipment.
Donotusethemforanyotherpurposes.
1. Wheelbrace.
Forremovingthewheeltrimandthewheel
fixingbolts.
2. Jackwithintegralhandle.
Forraisingthevehicle.
3. Boltcoverremovaltool.
Forremovingtheboltheadprotectorson
alloywheels.
4. Socketforthesecuritybolts(locatedinthe
glovebox).
Foradaptingthewheelbracetothespecial
"security"bolts.
Thejackmustonlybeusedtochangea
wheelwithadamagedorpuncturedtyre.
Donotuseanyjackotherthantheone
suppliedwiththisvehicle.
Ifthevehicledoesnothaveitsoriginal
jack,contactaCITROËNdealerora
qualifiedworkshoptoobtainthecorrect
jackforit.
Thejackdoesnotrequireany
maintenance.