WS1CI & WS1.25CI Manual Page 23
STEP 1U
Set Time of Day
The user can also set the time of day. Time of day should only need to be set after extended power outages or when daylight saving
time begins or ends. If an extended power outage occurs, the time of day will fl ash on and off which indicates the time of day should
be reset.
➟
STEP 2U
STEP 3U
➟➟
RETURN TO
NORMAL MODE
STEP 1U – Press SET CLOCK.
STEP 2U - Current Time (hour): Set the hour of the day using ▼ or ▲ buttons. Press NEXT to go to
step 3U.
STEP 3U - Current Time (minutes): Set the minutes of the day using ▼ or ▲ buttons. Press NEXT to
exit Set Clock. Press REGEN to return to previous step.
To Next Page
Loading...
Need help?
General
