To Next Page

To Previous Page

Page 26 WS1CI & WS1.25CI Manual

Valve History

STEP 1VH – Press ▲ and ▼ simultaneously for three seconds and release. Then press ▲ and ▼

simultaneously and release. If screen in step 2VH does not appear in 5 seconds the lock on the valve

is activated. To unlock press ▼, NEXT, ▲, and SET CLOCK in sequence, then press ▲ and ▼

simultaneously for 3 seconds and release. Then press ▲ and ▼ simultaneously and release.

STEP 2VH

– Days, total since start-up: This display shows the total days since startup. Press the NEXT

button to go to Step 3VH. Press REGEN to return to previous step.

STEP 3VH – Regenerations, total number since start-up: This display shows the total number of

regenerations that have occurred since startup. Press the NEXT button to go to Step 4VH. Press REGEN

to return to previous step.

STEP 4VH – Volume, total used since start-up: This display shows the total volume of water treated

since startup. This display will equal zero if a water meter is not installed. Press the NEXT button to exit

Valve History. Press REGEN to return to previous step.

Values in steps 2VH through 4VH cannot be reset.

➟

STEP 1VH

STEP 2VH

STEP 3VH

STEP 4VH

RETURN TO

NORMAL MODE

➟

Clack WS1CI User Manual

Other manuals for Clack WS1CI