Clarion CZ500 User Manual

English Français English Italiano English Español English English English
12
Select tuner as playing source
Press the [SRC]buttononceormoretoenter
radio mode.
Select one radio band
Press the [BAND]buttononthepanelor
[BND]buttonontheremotecontroltoselect
oneradiobandamongFM1,FM2,FM3,AM.
Manual tuning
Duringmanualtuning,thefrequencywillbe
changed in steps.
Press the [ ] / [ ]buttononthefront
panel or the remote control to tune in a higher/
lowerstation.
Auto tuning
Press and hold the [ ] / [ ]buttonon
the front panel or the remote control to seek a
higher/lowerstation.
Tostopsearching,repeattheoperationabove
orpressotherbuttonshavingradiofunctions.
Note:
When a station is received, searching stops
and the station is played.
Iftheunitreceivesastereobroadcast,the
indicatorlightofstereo‘ST’ontheLCD
display lights.
Auto store
Onlystationswithsucientsignalstrength
willbedetectedandstoredinthememory.
Press and hold the [PS/AS](2sec.)buttonto
start automatic station search.
Tostopautostore,pressotherbuttonshaving
radio functions.
Note:
1. After auto store, the previous stored
stationswillbeoverwritten.
2. Theunithasfourbands:FM1,FM2,
FM3andAM.FM3andAMcanstoreby
ASfunction.Eachbandscanstoresix
stations, CZ500 can store 24 stations in
total.
Manual store
While tuned into a desired radio station, press
andholdnumberbutton1–6tostoreitinthe
memory.
Radio Operations
Recall the stored stations
Pressonenumericbuttonamong1to6on
the panel or the remote control to select the
corresponding stored station.
Local seeking
WhenLOCALseekingison,onlythose
radiostationswithstrongradiosignalcanbe
received.
Press and hold the [D]buttononthe
front panel, then press the [ ]button
repeatedlyuntilLOorDXdisplaysonthe
screen,androtatetheknobtoselectLocalor
Distant mode.
Note:
Thenumberofradiostationsthatcanbe
receivedwilldecreaseafterthelocalseeking
mode is on.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
usefulwhensearchingforadesiredstationin
memory.
1. Press the [PS/AS]button.
2. When a desired station is tuned in, press
the [PS/AS]buttonagaintocontinue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
buttonfortwosecondsorlonger,otherwise
the auto store function is engaged and the
unit starts storing stations.

Clarion CZ500 Specifications

General

Brand	Clarion
Model	CZ500
Category	Car Receiver
Language	English