What to do if buttons on Clarion NX501A Car Receiver are not working?
If nothing happens when you press the buttons on your Clarion Car Receiver and the display is not accurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod to resolve this. Note that this will turn off the power and clear stored radio frequencies and titles.
Why is my Clarion Car Receiver remote control not working?
If the remote control unit of your Clarion Car Receiver does not work, it may be due to direct sunlight falling on the light-receptive part. Also, check the remote control unit's battery to ensure it is not dead or missing.
Why does my Clarion NX501A Car Receiver sound skip or is noisy?
If the sound skips or is noisy when playing a disc on your Clarion Car Receiver, the disc might be dirty. Clean it with a soft cloth. Alternatively, the disc could be heavily scratched or warped, in which case you should replace it with a disc in good condition.
What to do if Clarion NX501A Car Receiver USB device is not recognized?
If your Clarion Car Receiver's USB device is not recognized, disconnect and reconnect the USB device. If it's still not recognized, try replacing it with a different USB device. Also, check if connectors are loose.
Why are there red, green, and blue points in the display of my Clarion NX501A?
This is not a failure, but a phenomenon peculiar to a liquid crystal panel (The liquid crystal panel is produced according to technology with very high precision. Note that, though there are effective pixels of 99.99% or more, pixel missing or normally lit pixels account for 0.01%).
Why won't my Clarion NX501A Car Receiver turn on?
If your Clarion Car Receiver's power isn't turning on and no sound is produced, the fuse may be blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Also, check for incorrect wiring, and if found, consult your installation center.
Why is the display dark on my Clarion NX501A Car Receiver?
If the display on your Clarion Car Receiver is dark, the brightness control may be too low. Adjust the brightness properly. The operating condition might not be good. Set to an appropriate temperature (25 or so) and check it again.
Why is there no image on my Clarion NX501A Car Receiver screen?
If the image is not displayed on your Clarion Car Receiver, ensure that the parking brake is engaged.
Why is the Bluetooth audio quality poor on my Clarion NX501A Car Receiver?
If the audio quality is poor after connecting a Bluetooth enabled device to your Clarion Car Receiver, the microphone may not be correctly positioned. Use an optional external microphone and adjust its position. Also, the Bluetooth reception might be poor. Move the device closer to the car audio system or remove any obstacle between the device and the system.
Why is the iPod/iPhone video image disturbed on my Clarion NX501A Car Receiver?
If the video of iPod/iPhone image is disturbed on your Clarion Car Receiver, the TV Signal setting of the iPod/ iPhone is not set correctly. Set the TV Signal setting (NTSC/ PAL) of the iPod/iPhone correctly.
General| Display Size | 6.2 inches |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| Navigation | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| USB Port | Yes |
| HD Radio | No |
| SiriusXM Ready | Yes |
| DVD Player | Yes |
| SD Card Slot | Yes |
| Rear View Camera Input | Yes |
| Display Resolution | 800 x 480 pixels |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| CD Playback | Yes |
| Steering Wheel Control | Yes |
Warns about the safe use of the rear-view camera while driving.
Details the function of each button on the unit's front panel.
Explains the function of each button on the remote control unit.
How to register and manage up to 5 Bluetooth audio players.
Steps to register cellular phones for Bluetooth connectivity.
How to set and manage the unit's anti-theft code for security.
Procedures for unlocking the unit if the anti-theft code is entered incorrectly.
Troubleshooting for general power, display, and DVD player problems.
Solutions for common issues with USB device connection and recognition.
Solutions for problems with Bluetooth pairing and audio quality.
Explains error messages related to the DVD player and their solutions.
Initial steps and precautions before starting the installation process.
Warnings and precautions specifically for the installation process.
Step-by-step guide for installing the main unit in Nissan vehicles.
Step-by-step guide for installing the main unit in Toyota and other vehicles.
Important safety warnings and guidelines for wiring the unit correctly.
Diagrams and explanations of all unit wire connections for installation.
Instructions on connecting the parking brake cord for video source access.
Safety warning regarding the use of the rear-view camera while driving.
Access to destination selection, route display, software customization, navigation start, and traffic summary.
Various methods for choosing a destination, including address entry.
Detailed steps for entering an address, including country, state, and city.
Steps for entering street names and house numbers to define an address.
How to search for destinations using postal codes.
How to select destinations from built-in Places of Interest.
How to find Places of Interest using predefined categories.
How to search for Places by category and search area.
How to search for Places by their names across different locations.
How to search for Places by entering their phone number.
How to search for nearby assistance like car repair or petrol stations.
How to select a destination by interacting directly with the map.
How to select, refine, and confirm a favourite destination.
How to set and navigate to your Home location.
How to select destinations from the call history.
How to enter destination coordinates in various formats (decimal, UTM).
How to set a location from a photo as a destination.
How to build a route by adding multiple destinations.
Options for editing routes, viewing overview, bypassing, cancelling, and accessing more route functions.
Settings for calculating fuel-efficient routes and displaying cost/CO2 emissions.
How to check and select different route alternatives for planning or active routes.
How to edit routes by adding, deleting, reordering destinations, or pausing.
How to cancel the current navigated route.
How to set a new starting point for route planning.
How to set up warnings for speed cameras and exceeding speed limits.
Steps to download and install updates via the My Updates section in Toolbox.
Steps to create a backup of the navigation device's contents.
Details on the backup status bar, restoring backups, and handling warnings.
How to transfer files between the PC and the navigation device to free up space.
To Next Page
