31
Installation
Connect the condensate drain and duct it in accordance with current regulations. Avoid siphons and short
radius bends that can cause obstructions. Be careful to avoid possible accidental obstructions during
operation.
A
Fig. 26
Condensate drain for models 4.1 - 5.1 - 6.1 - 7.1 - 8.1
Condensate drain for models 2.1 - 3.1
A
Condensate drain for models 9.1 - 10.1 - 12.1 - 14.1
Fig. 27
The drain hole (A) is covered by a rubber plug. If the smaller drain hole cannot fulfil the drainage requirements,
the larger drain hole can be used at the same time.
To Next Page
Loading...
Need help?
General