4.1.3.6 WAN Access Type – Dynamic IP
Choose Dynamic IP to obtain IP address information automatically from your ISP. Select this option if
your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem
services.
Apply 3G or 3.5G transmission rate for the backup. Once Dynamic IP connection is disconnected, the
system automatically connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to
search downward for 3/2.75/2.5G signals until none existed.
Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes, the
system immediately switches to 3.5G Internet connection and will disconnect automatically the original
Dynamic IP recovers.
To Next Page
Loading...
