CNET CBR-980 - WAN Access Type - PPTP

52
Clone MAC Address
Copy the MAC address from the device you had
registered to your ISP if your ISP asks for the
specific MAC Address.
Enable IGMP Proxy
The
Internet Group Management Protocol
(IGMP)
is a communications protocol used to
manage the membership of Internet Protocol
multicast groups. IGMP is used by IP hosts and
adjacent multicast routers to establish multicast
group memberships. You can choose to enable
IGMP Proxy to provide service.
Enable Ping Access on WAN
Select Enable Ping Access on WAN, will make
WAN IP address response to any ping request
from Internet users. It is a common way for
hacker to ping public WAN IP address, to see is
there any WAN IP address available.
Enable Web Server Access on WAN
This option is to enable
Web Server Access
function on WAN.
Apply Changes & Reset
Click on Apply Changes
to save the setting
data. Or you may click on Reset to clear all the
input data.
5.1.1.8 WAN Access Type -- PPTP
If you have applied for a PPTP connection type from ISP, please follow the steps to set up your WAN
connection.\