Item Description
User Name
Input your user name supplied by ISP. If you
don’t know, please check with your ISP.
Password
Input your Password supplied by ISP
Service Name
Input the service name supplied by ISP.
Connection Type
It has three types:
Demand, and Manual.
Idle Time
It is the time of inactivity before disconnecting
your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for
which the Internet connect is maintained during
inactivity. If the connection is inactive for longer
than the defined Idle Time, then the connection
will be dropped. Either set this to zero or enable
Auto-reconnect to disable this feature.
MTU Size
MTU stands for Maximum Transmission Unit. For
PPPoE connection, the default MTU should be
provided by computer operating systems
(OS). Advanced users can set the MTU
manually for increasing the internet performance.
The largest number allowed by Ethernet at the
network layer is 1492 byte
DNS
If ISP provides you DNS information, please
select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS
information into the blank.
3.5G Backup
The default interval between the two connection
detection is 3 minutes, and the range is from 1 to
60 minutes. Once Internet connection is
disconnected, the system automatically connects
Internet via 3.5G adapte
r. If 3.5G signal is not
available, it starts to search downward for
3/2.75/2.5G signals until none existed.
To Next Page
Loading...
