5.3 NAT
5.3.1 Visual Server
The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of
service port numbers (from the WAN port) to a particular LAN IP address.
Item Description
Enable Port Forwarding Select to enable Port Forwarding service or not.
IP Address Specify the IP address which receives the incoming packets.
Protocol Select the protocol type.
Port Range Enter the port number, for example 80-80 or 20-22
Comment Add comments for this port forwarding rule.
Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
Current Por
Table
It will display all port forwarding regulation you made.
Delete Selected & Delete All
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
Reset
Click Reset to cancel.
To Next Page
Loading...
