4.1.3.7 WAN Access Type – PPPoE
This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol over Ethernet) if
your ISP uses PPPoE connection. Your ISP will provide you with a username and password.
Apply 3G or 3.5G transmission rate for the backup. In other words, once PPPoE connection is
disconnected, the system automatically connects Internet via 3.5G adapter. If 3.5G signal is not
available, it starts to search downward for 3/2.75/2.5G signals until none existed.
Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes, the
system immediately switches to 3.5G Internet connection and will disconnect automatically the original
PPPoE connection recovers.
Click on Next button to go on next setting page.
To Next Page
Loading...
