EasyManua.ls Logo

CNET CBR-980 - LAN Interface Setup

CNET CBR-980
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
existed.
Clone MAC Address
Copy the MAC address from the device you had
registered to your ISP if your ISP asks for the specific
MAC Address.
Enable IGMP Proxy
The Internet Group Management Protocol (IGMP) is
a communications protocol used to manage the
membership of Internet Protocol multicast groups.
IGMP is used by IP hosts and adjacent multicast
routers to establish multicast group memberships. You
can choose to enable IGMP Proxy to provide service.
Enable Ping Access on WAN
Select Enable Ping Access on WAN, will make WAN
IP address response to any ping request from Internet
users. It is a common way for hacker to ping public
WAN IP address, to see is there any WAN IP address
available.
Enable Web Server Access on WAN
This option is to enable Web Server Access function
on WAN.
Apply Changes & Reset
Click on Apply Changes to save the setting data. Or
you may click on Reset to clear all the input data.
5.1.2 LAN Interface Setup
This page is used to configure the parameters for local area network that connects to the LAN ports of
your WLAN Broadband Router. Here you may change the setting for IP address, subnet mask, DHCP,
etc.

Table of Contents

Other manuals for CNET CBR-980

Related product manuals