Chapter 4: To use the web interface
98-140012-H Advanced settings 95
SIM PIN for cellular network (optional)
To enable or disable the use of a cellular SIM PIN
To enable or disable the use of a PIN to access the cellular network, do as follows:
1. Under Advanced, select EXPLORER Cellular Modem.
2. Select Enable/disable SIM PIN.
3. Under Enable/Disable PIN select or clear the box next to Require PIN on startup.
• If you clear the box, you can access and use the terminal without entering a PIN
• If you select the box, you must enter a PIN on startup before you can make calls or data
sessions
4. If you selected Require PIN on startup, type in the PIN next to Enter current PIN.
5. Click Save.
The new PIN settings will take effect at next power on.
To change the cellular SIM PIN
To change the PIN used to access the cellular network, do as follows:
1. Under Advanced, select EXPLORER Cellular Modem.
2. Select Change SIM PIN.
3. Under Change PIN type in the Current PIN.
4. Type in the New PIN and retype it on the next line.
5. Click Save. The new PIN settings will take effect at next power on.
The SIM settings for cellular network are only available when the EXPLORER Cellular
Modem is inserted.
To Next Page
Loading...
